Hi-Torque Versacore™

Peripheral Workhorse Guide Wires

From Start To Finish


  • Workhorse wire allows for delivery of PTA catheters and stents
  • Core-to-tip design enables 1:1 torque1
  • Combination of support and flexibility meets most peripheral intervention needs
  • Polyethylene jacket with silicon coating
  • Soft and shapeable tip has gold design for enhanced visibility
  • Guide wire comes in lengths of 145 cm, 175 cm, 260 cm and 300 cm

Three Different Tip Types

  • Hi-Torque Versacore™ Modified J Guide Wire configuration is a highly versatile guide wire, which combines support and flexibility for successful access to a wide range of vascular anatomy.
  • Hi-Torque Versacore™ Floppy Guide Wire configuration is a highly flexible guide wire for atraumatic negotiation of high-grade stenoses and multiple lesions.
  • Hi-Torque Versacore™ Standard Guide Wire configuration is a highly supportive guide wire that offers increased catheter support and trackability for traversing acute angles.

Ordering Information

ProductPart NumberDiameterLengthTip StyleUnits Per Package
Hi-Torque Versacore™ Modified J1012068-010.035 in145 cmCore-To-Tip5
Hi-Torque Versacore™ Modified J1012068-050.035 in175 cmCore-To-Tip5
Hi-Torque Versacore™ Modified J1012068-090.035 in260 cmCore-To-Tip5
Hi-Torque Versacore™ Modified J1012068-070.035 in300 cmCore-To-Tip5
Hi-Torque Versacore™ Floppy1012068-020.035 in145 cmCore-To-Tip5
Hi-Torque Versacore™ Floppy1012068-040.035 in175 cmCore-To-Tip5
Hi-Torque Versacore™ Floppy1012068-060.035 in260 cmCore-To-Tip5
Hi-Torque Versacore™ Standard1012068-030.035 in145 cmCore-To-Tip5
Hi-Torque Versacore™ Standard1012068-080.035 in300 cmCore-To-Tip5
LOC™ Guide Wire Extension1012068-100.035 in115 cmN/A5

Full Peripheral Guide Wire Brochure

Customer Service

Data on file at Abbott.


  1. Tóth et al. How to select a guidewire: technical features and key characteristics. Heart 2015;101:645-652

MAT-2006305 v2.0

Important Safety Information

Hi-Torque™ Steerable
Guide Wire



The Hi-Torque™ Steerable Guide Wire is intended for use in angiographic procedures to introduce and position diagnostic and interventional devices within the peripheral vasculature during percutaneous procedures. The wire can be torqued to facilitate navigation through tortuous vessels.

The Hi-Torque™ Steerable Guide Wire is not intended for use in the coronary or neurovasculature.


The Hi-Torque™ Steerable Guide Wire is not intended for use in the coronary or neurovasculature.


This device is designed and intended for ONE-TIME USE ONLY. DO NOT RESTERILIZE AND / OR REUSE.

Observe all guide wire movement in the vessels. Before a guide wire is moved or torqued, the tip movement should be examined under fluoroscopy. Do not torque a guide wire without observing corresponding movement of the tip; otherwise, vessel trauma may occur.

Torquing a guide wire against resistance may cause guide wire damage and / or guide wire tip separation. Always advance or withdraw the guide wire slowly. Never push, auger, withdraw, or torque a guide wire which meets resistance. Resistance may be felt and / or observed under fluoroscopy by noting any buckling of the guide wire tip. Determine the cause of resistance under fluoroscopy and take any necessary remedial action.

If the wire tip becomes entrapped within the vasculature, DO NOT TORQUE THE GUIDE WIRE.

Maintain continuous flush while removing and reinserting the guide wire to prevent air from entering the catheter system. Perform all exchanges slowly to prevent air entry and / or trauma. Wipe the wire before all exchanges.

When reintroducing the guide wire, confirm that the interventional device tip is free within the vessel lumen and not against the vessel wall. Failure to do so may result in vessel trauma upon guide wire exit from the device. Use the radiopaque marker of the interventional device to confirm position.


Guide wires are delicate instruments and should be handled carefully. Prior to use and when possible during the procedure, inspect the guide wire carefully for bends, kinks, or other damage. Do not use damaged wires. Using a damaged wire may result in vessel damage and / or inaccurate torque response.

Confirm the compatibility of the guide wire diameter with the interventional device before actual use.

Free movement of the guide wire within the interventional device is an important feature of a steerable guide wire system because it gives the user valuable tactile information. Test the system for any resistance prior to use. Adjust or replace the hemostatic valve with an adjustable valve if it is found to inhibit guide wire movement.


Potential Adverse Events associated with use of this device may include the following but not limited to perforation, dissection, occlusion, myocardial infarction, embolism and infection.

MAT-2306607 v1.0